Free ShippingOn Orders Over $99
BACKED BY OURLIFETIME WARRANTY
WE SUPPORT OURVETERANS & COPS
The first Rapid Fire we ever made, back in 2016, had a semi-serrated blade. Ten years later, that edge is back on our number one seller. The Rapid Fire Coyote Semi-Serrated is the same big, overbuilt assisted flipper trusted by U.S. military, EOD techs, law enforcement, first responders, and hard-use knife users around the world, now with a serrated section that tears through rope, webbing, and strapping. You get Cryo D2 steel, a titanium nitride finish, grippy coyote tan G10 scales, and an action that fires the blade open with one pull of the flipper tab.
This is a limited run. It carries every upgrade we have made to the Rapid Fire over the last decade, including stronger T8 pocket clip screws that match the body screws and a flush filler tab on the off side. If you have been waiting for a serrated Rapid Fire, this is your shot.
Every Rapid Fire Coyote Semi-Serrated ships with:
The serrations sit close to the handle, where you have the most leverage. They bite into rope, webbing, strapping, zip ties, and other tough, fibrous material that a plain edge can slide across. The front of the blade is plain edge with plenty of belly for slicing, detail work, and everyday cuts. You get both without carrying two knives.
The steel is D2, a high-carbon tool steel known for holding an edge, and the same steel we use in our Tracker-X fixed blades. We add a cryogenic treatment after heat treat to improve wear resistance and edge stability, then harden it to 60 HRC. The titanium nitride (TiN) finish goes on by plasma deposition in a sealed vacuum chamber. It is hard, non-reflective, resists scratching and peeling, and adds another layer of corrosion protection.
The name says it. Hit the flipper tab and the assisted opening does the rest, snapping the blade out and into a solid liner lock. It is a one-hand move that takes no practice. The lock stays put through hard use, and when the work is done, push the liner over with your thumb and fold it closed.
This is a large EDC knife, and it does not feel like one in your pocket. The deep carry clip mounts tip-up on the left or right side, and a flush filler tab sits on the opposite side so the grip stays smooth in your hand. The clip is held down by T8 screws, the same size as the body screws, and a spare clip comes in the box.
The scales are G10, a fiberglass laminate that shrugs off water, sweat, heat, and cold. The sculpted texture gives your hand something to hold onto when things get wet or muddy, and the handle is long enough for a full four-finger grip, XL hands and gloves included.
In 2016, the first Rapid Fire shipped with a semi-serrated blade in AUS8 steel. It is the knife that put Off-Grid on the map. Ten years later, we brought that edge back and built it the way we build them now: Cryo D2 steel, titanium nitride finish, stronger T8 hardware, and a flush filler tab. This run is limited, so if you want one, do not wait. Like every Off-Grid knife, it is backed by our Lifetime Replacement Guarantee and old-school customer service from real people.
RUGGED DESIGN. RAZOR PERFORMANCE.™
