Tracker-X
Lifetime Warranty
SITEWIDE 2-DAYFREE SHIPPING
BACKED BY OURLIFETIME WARRANTY
WE SUPPORT OURVETERANS & COPS
Leave your hatchet at home, the OGK Tracker-X is a no-nonsense rough-use fixed blade knife. The Tracker-X is a mid-sized knife with a wide belly, flat grind with Cryo D2 tool blade steel. We added grippy 'snake skin' Micarta scales with a thick handle that fits large hands with or without gloves. Included is a custom Kydex sheath with a Quick-Clip™ belt loop that can be switched to horizontal "scout" carry.
The full tang D2 is 5mm thick and was designed to take a beating. Our D2 is cryogenically treated with a HRC of 60-61, a truly 'tough as nails' steel that holds an edge even after tons of hard-use, the cryo treatment adds extra ware and corrosion resistance.
The full tang D2 is 5mm thick and was designed for rugged use in all conditions, the cutting edge is slightly under 5 inches and the handle is 4.5 inches, full length is 9.5 inches, without the sheath the weight is 10.3 ounces and with the sheath 12.4 ounces.
Off-Grid Knives designed the Tracker-X to have enough blade length for chopping, wood processing and fine wood work if necessary. Perfect for many Off-Grid outdoor uses such as bushcrafting, camping, hunting, survival and even prepping food at your campsite.
We added a grippy texture to the 'snake skin' Micarta, the Tracker-X's grip is designed to stay in your hand in all weather conditions, hot or cold, wet or dry, you'll always have strong safe grip.
The sheath can be worn vertically or horizontally with the customizable quick-clip, it snaps quickly and easily over your belt or pack, and it's held tightly inside the Kydex.
D2 is considered a “borderline stainless steel” because it contains 11.5 percent chromium. D2 also has a very high carbon content, 1.5%, which lowers corrosion resistance because the carbon “grabs” a lot of D2’s chromium to form chromium carbides. The chromium carbides are good for improving wear resistance, improved wear resistance enhances edge holding.
D2 tool steel is a high carbon steel that is excellent for use in hostile environments and is known for incredible edge retention.
We carefully heat treated this D2 steel to a HRC of 60, this is high quality D2 steel made for hard-use in all conditions. Bottom line, D2 will hold an edge like a champ after tons of hard-use and has high wear and abrasion and corrosion resistant properties, that's what you'll get in the Tracker-X fixed blades.
Perfect for camping, bushcraft, survival, preppers, hunting, fieldwork, wood processing, hiking and all off-grid adventures.
D2 is not hard to sharpen it takes more time than a softer steel, but it's not difficult to put an edge on D2, even in the field with a pocket diamond abrasive sharpener. With all knife steels there's trade offs, with our HRC 60 D2 you'll rarely need to sharpen, but when the time comes, you simply sharpen and reset the D2 for another long run of hard-use cutting.
