RAPID FIRE BLACKOUT

$97.99
Free Standard Shipping On Orders Over $99
Free Standard Shipping On Orders Over $99
Payment Logo
Backed By Our Lifetime Warranty
Backed By Our
Lifetime Warranty
Free Shipping Free ShippingOn Orders Over $99
BACKED BY OURLIFETIME WARRANTY
WE SUPPORT OURVETERANS & COPS

Frequently Bought Together

Description
Rapid Fire Blackout: Assisted Flipper with Cryo D2 Steel

The Rapid Fire Blackout is part of the Rapid Fire series, the line that put Off-Grid on the map. It is a big, overbuilt assisted flipper made for real work: Cryo D2 steel with a titanium nitride finish, grippy black G10 scales, and an action that fires the blade open with one pull of the flipper tab. It is trusted by U.S. military, EOD techs, law enforcement, first responders, federal agents, private security, and hard-use knife users around the world.

We never stopped refining it. The latest version gets stronger T8 pocket clip screws that match the body screws, so one driver handles every screw on the knife. Fit, finish, and edge are dialed in before it ships, so it is ready to carry and ready to work right out of the box.

Every Rapid Fire Blackout ships with:

  • Spare pocket clip
  • Filler tab
  • Microfiber cloth
  • Lifetime warranty card
  • 2 Off-Grid stickers and a mini brochure
"I have plenty of knives and this Rapid Fire is as good as a 300 dollar Benchmade."
Fred G.
Rapid Fire Blackout Cryo D2 drop point blade with titanium nitride finish
Cryo D2 Steel with Titanium Nitride Finish

D2 is a high-carbon tool steel known for holding an edge through serious abuse. It is the same steel we use in our Tracker-X fixed blades. With roughly 12 percent chromium, D2 sits close to stainless, so it resists corrosion better than most tool steels. We take it further with a cryogenic treatment, a deep-freeze step after heat treat that improves wear resistance and edge stability. Hardened to 61 HRC, this blade keeps cutting long after softer steels give up.

Then we coat it in titanium nitride (TiN), applied by plasma deposition in a sealed vacuum chamber. The result is a hard, non-reflective finish that resists scratching and peeling and adds another layer of corrosion protection. It also looks the part.

Rapid Fire Blackout assisted flipper opening sequence
They're Called "Rapid Fire" for a Reason

Pull the flipper tab and the assisted opening takes over, driving the blade out fast and into a solid liner lock. One hand, every time. We would bet it becomes the fastest opener in your rotation. The liner lock holds firm under hard use, then disengages cleanly with your thumb when the job is done.

Rapid Fire Blackout deep carry pocket clip and slim closed profile
Big Knife. Deep Carry.

The Rapid Fire sits on the large side of EDC, but it does not carry like it. The pocket clip rides deep and can be mounted for left or right side, tip-up carry, and the handle is just 0.44 inches thick closed. Clip it on and forget it is there until you need it. The clip is now secured with stronger T8 screws, and a spare clip comes in the box.

Rapid Fire Blackout textured black G10 handle scales
Black G10 Grip

G10 is a fiberglass laminate that is tough, stable, and unbothered by water, sweat, or temperature swings. The textured pattern on the Blackout scales locks into your hand, and the handle has room for a full four-finger grip, even for XL hands or gloves. Once the blade is open, the flipper tab doubles as a finger guard, and jimping on the thumb ramp and the back of the handle keeps your grip locked in. Wet, muddy, or cold, it stays put and stays ready to work.

Rapid Fire Blackout assisted folding knife by Off-Grid Knives
Overbuilt. Proven. Backed for Life.

Ten years in, the Rapid Fire series is still the knife a lot of people reach for first. Cryo D2, titanium nitride, G10, and an assisted action that never gets old. Every Off-Grid knife is backed by our Lifetime Replacement Guarantee and old-school customer service from real people. Welcome to the Off-Grid family.

RUGGED DESIGN. RAZOR PERFORMANCE.

Specifications
General
SKU
7777891258
Weight
5.9 oz.
Cutting Edge
3.5 in.
Right / Left Hand Carry
Both
Collection
Mechanical
Knife Mechanism
Locking Mechanism
Liner Lock
Opening Mechanism
Flipper Tab
Blade
Blade Length
3.75 in.
Cutting Edge
3.5 in.
Blade Width
1.25 in.
Blade Thickness
3 mm
Blade Hardness (HRC)
61
Blade Material
Cryo D2
Blade Style
Drop Point
Blade Color
Black
Blade Finish
Titanium Nitride (TiN)
Blade Edge
Plain Edge
Handle
Handle Length
4.75 in.
Closed Thickness
0.44 in.
Handle Color
Black
Handle Material
G10
Handle Body Screws
T8
Pocket Clip
Carry
Tip-Up, Left or Right
Clip Screws
T8, Countersunk
Spare Pocket Clip
Included
 
Reviews
You May Also Like