DownShift | Off-Grid Gear® (Nightfall)

$39.99
Free Standard Shipping On Orders Over $99
Free Standard Shipping On Orders Over $99
Payment Logo
Backed By Our Lifetime Warranty
Backed By Our
Lifetime Warranty
Free Shipping Free ShippingOn Orders Over $99
BACKED BY OURLIFETIME WARRANTY
WE SUPPORT OURVETERANS & COPS
Description
DownShift Button Lock Folder: Nightfall

The DownShift is built for the carry that does not call attention to itself. A button lock folder with a modified wharncliffe blade, two ways to open, and a deep carry clip that makes it disappear in the pocket. This is the knife you stop thinking about because it just works.

The DownShift is brought to you by Off-Grid Gear, a division of Off-Grid Knives. Same standards, same attention to detail, built for everyday real-world use.

The blade is Swedish Sandvik 12C27 with a PVD blackwash finish. 12C27 is a workhorse steel trusted by knife makers worldwide for its corrosion resistance, easy sharpening, and ability to hold an edge through daily use. The PVD blackwash lays a hard, wear-resistant layer over the steel, and the stonewashed texture hides scratches and carry wear naturally. The modified wharncliffe profile drops the spine into a piercing tip that excels at precision work: opening packages, breaking down boxes, detail cuts. The straight cutting edge means consistent geometry from heel to tip, so the whole blade works the same way every time.

The button lock is where this knife earns its keep. Press and flick to deploy, press to close. One-handed open, one-handed close. The lock holds firm under pressure and releases clean with no fumbling. If you prefer traditional deployment, the dual thumb studs give you that option too. Two ways to open, one secure lock, no compromises. Ball bearings underneath keep the action smooth and fast either way.

The black canvas micarta scales give you a confident grip that gets better with time and use. Micarta is the handle material serious knife people keep coming back to because it grips harder when wet, wears in with character, and holds up to abuse without complaint. Spine jimping gives you control on detail work, and a deep carry pocket clip seats the knife low and out of sight.

Nightfall: Black on black. Blackwash blade, black canvas micarta scales, black hardware. Stealthy, unified, all business.

DownShift Nightfall modified wharncliffe blade in Sandvik 12C27 with PVD blackwash finish, CAD render
DownShift Nightfall blackwash blade
Sandvik 12C27 Blade with PVD Blackwash Finish

Sandvik 12C27 is Swedish stainless steel with a long track record in hard-working knives. It resists corrosion, sharpens fast, and holds an edge through real daily use without any fuss. The PVD blackwash finish lays a hard, wear-resistant layer on top and gives the blade the dark, worked-in look that defines the Nightfall. Because it is stonewashed, scratches and carry marks blend in instead of standing out. The modified wharncliffe profile drops the spine into one of the most piercing tip geometries you can put on an EDC knife. Where a drop point gives you belly for general cutting, the wharncliffe gives you precision and control. The straight edge gives you the same slicey geometry from heel to tip. Spine jimping lets you choke up with full traction for the precise work this blade was built for.

DownShift Nightfall black canvas micarta handle scales, CAD render
DownShift Nightfall black canvas micarta handle
Black Canvas Micarta Scales

Micarta is the handle material that serious knife people gravitate to once they have tried it. It is canvas fabric layered with resin under high pressure, and the result is a scale that grips harder when wet, stays comfortable when it gets warm, and develops its own character with use. On the Nightfall, the black canvas micarta runs straight into the blackwash blade and black hardware for a true blackout build. The texture is just aggressive enough to lock into your hand without feeling rough or abrasive over long carry. The handle is shaped around real-world grip, not showroom looks. There is a comfortable choil for the index finger and a tapered profile that disappears against your leg when clipped. Micarta is tough, lightweight, and timeless. This is a handle that gets better the longer you carry it.

DownShift Nightfall button lock and dual thumb studs, CAD render
DownShift Nightfall button lock and thumb stud deployment
Button Lock and Thumb Stud Deployment

The DownShift gives you two ways to open and one secure way to lock. Press the button lock with a little wrist flick and the blade swings out clean and ready, riding on caged ball bearings for a smooth fast action. Press it again and the blade closes just as easily and "Downshifts" into the locked position. If you grew up deploying with thumb studs and prefer that motion, the DownShift has dual thumb studs positioned for easy access from either hand. The button lock holds firm under real cutting pressure with solid lockup, then releases without a fight when you want it to. This is the kind of action that makes you open and close the knife for no reason just because it feels good. Two ways in, one secure lock, all day reliability.

DownShift Nightfall deep carry pocket clip, CAD render
DownShift Nightfall deep carry pocket clip in use
Deep Carry Pocket Clip

The DownShift is designed to ride low and disappear. The deep carry clip seats the knife so only a sliver shows above your pocket line, which means it stays out of the way when you sit, drive, or move through your day, and it does not advertise itself to anyone looking. On the Nightfall that matters even more, since there is nothing shiny to catch an eye. The clip tensions properly so the knife stays put when you want it to and draws clean when you reach for it. Hardware is matched to the rest of the knife so the whole package reads as one intentional design rather than parts bolted together. If you have ever been annoyed by a clip that rides high, prints through your pants, or loosens up after a few months, you will appreciate how this one was built.

DownShift Nightfall blackout button lock folder
DownShift Nightfall button lock EDC folder
The Button Lock EDC That Earns Its Spot

The DownShift Nightfall is what happens when a button lock folder is done right at a price that makes sense. Sandvik 12C27 steel with a PVD blackwash finish, modified wharncliffe blade with a piercing tip, black canvas micarta scales, ball bearing action, dual deployment options, and a deep carry clip. It is compact enough to carry every day, capable enough to handle real EDC work, and built with the quality you expect from Off-Grid. This is the knife you stop thinking about because it just works.

Specifications
General
Weight
2.8 oz.
Blade Steel
Sandvik 12C27
Blade Length
3.1 in.
Full Open Length
7.2 in.
OEM
China
Mechanical
Knife Mechanism
Ball Bearing
Locking Mechanism
Button Lock
Opening Mechanism
Dual Thumb Studs / Button Lock Flick
Blade
Blade Length / Cutting Edge
3.1 in.
Blade Width
0.76 in.
Blade Hardness (HRC)
58-59
Blade Material
Sandvik 12C27
Blade Style
Modified Wharncliffe / Reverse Tanto
Blade Finish
PVD Blackwash
Blade Edge
Plain Edge
Handle
Grip
3.75 in.
Handle Body Screws
T6
Hardware
Stainless Steel, Black Finish
Handle Material
Micarta
Pocket Clip
Material
Stainless Steel
Deep Carry
Yes